Submitting PCR and Plasmid samples in a 96-well Plate
Use a PCR plate and ensure that the seal over the plate is very tight to prevent leakage into other wells.
Submitting Samples in 96-well Plates
Following this format will minimize technical errors and expedite processing times.
• Load samples vertically, starting with sample #1 in well A1, sample #2 in B1, etc.
• If submitting a partial plate, please do not skip any wells.
• If providing many different primers for one order, we prefer them in tubes.
• If possible, please place samples which use the same primer close together.